After You Purchase Peptides: A Lab Receiving, Inspection and Logging Checklist
Most attention goes into choosing where to purchase peptides. Far less goes into the ten minutes after the parcel arrives, even though that is when a lab catches shipping damage, label mismatches and documentation gaps while they are still easy to resolve. This checklist turns receiving into a repeatable routine: inspect, match, log, store. It applies to lyophilized research peptides sold for laboratory use only.
In brief: photograph the parcel before opening it, check every vial for intact seals and correct labels, match each lot number to its Certificate of Analysis (COA), record everything in a receiving log, and move the material into appropriate storage the same day.
Before the parcel arrives
- Save the order record. Keep the order confirmation, product names, fill amounts and quantities in one place.
- Request or download the COAs. Ask the supplier which lot will ship and get the matching reports ahead of time. Our quality control and COA page explains how we document batches.
- Track the shipment. Watch the tracking page so someone is available to receive the parcel and it does not sit on a loading dock or porch.
- Prepare storage space. Know where the vials will go before they arrive, so they are not left on a bench.
Step 1: Inspect the outer package
Before opening, photograph the parcel from two sides, including the shipping label. Note any crushing, punctures, moisture or tampering. Record the date and time of delivery. If the outer package is clearly damaged, keep the photos and packaging and contact the supplier before discarding anything; most written policies, including our refund and returns policy, require you to report damage within a stated window.
Step 2: Inspect each vial
- Seal and closure. Flip-off caps and crimp seals should be intact; stoppers should not be pushed in or raised.
- Glass. Check for cracks or chips, especially at the neck and base.
- Contents. Lyophilized peptide usually appears as a white to off-white cake or powder. Note anything unexpected, such as visible moisture, liquid in a vial that should be dry, or discoloration, and photograph it.
- Labels. Confirm the product name, fill amount and lot number are printed and legible.
Do not open or reconstitute a vial you have questions about. Once a peptide has been opened or reconstituted, most suppliers can no longer accept it back, so raise concerns first.
Step 3: Match lots to documentation
For every vial, compare the lot or batch number on the label with the COA. Check that the product name and fill amount match, that the report includes HPLC purity and a mass spectrometry identity result, and that the testing laboratory is named. If you need help reading the report, our guide to interpreting COAs, HPLC and mass spectrometry covers each field. A mismatch is not always a problem, since suppliers sometimes ship a newer lot, but it should always be resolved in writing before use.
Step 4: Log the receipt
A simple receiving log makes later results traceable. A spreadsheet works; the fields below are a practical minimum.
| Field | Example entry |
|---|---|
| Date and time received | 2026-11-18, 2:15 PM |
| Supplier and order number | Supplier name, order # |
| Product and fill amount | Compound, mg per vial |
| Lot number | As printed on the vial |
| COA on file | Yes / no, file name |
| Condition notes | Seal intact, cake dry, photos saved |
| Storage location | Freezer or fridge, shelf, box |
| Received by | Initials |
Step 5: Store the same day
Peptides can degrade through several chemical and physical pathways, including oxidation, deamidation, hydrolysis and aggregation, and moisture, temperature and light all influence those processes (Manning et al., Pharm Res, 2010). For that reason, sealed lyophilized vials are generally kept cold, dry and protected from light, and are allowed to reach room temperature before opening so condensation does not form inside. Our storage and stability checklist covers lyophilized, liquid and nasal formats in more detail, and our article on bacteriostatic vs. sterile water covers the reconstitution step.
Common receiving mistakes to avoid
- Leaving parcels unopened on a desk. Hours at room temperature or in a warm mailroom add avoidable exposure.
- Opening cold vials immediately. Condensation can introduce moisture into a dry cake.
- Discarding packaging too early. If a damage claim is needed, the box and photos are your evidence.
- Logging the product but not the lot. Without the lot number, results cannot be tied back to a specific COA.
- Reconstituting before questions are answered. Opened vials usually cannot be returned.
Step 6: Close the loop with the supplier
If everything checks out, file the photos and COAs with the log. If anything does not, contact the supplier with the order number, lot number, photos and a short description. A reputable supplier will respond in writing with a clear resolution. You can reach our team by call or text at 727-513-9780 or by email at puretestedpeptides@gmail.com.
Where to purchase peptides with documentation in place
Receiving goes smoothly when documentation is ready before the parcel arrives. If you are choosing a supplier, see our best USA peptide supplier scorecard, then browse our research catalog, including the CJC-1295 / ipamorelin 20mg blend and bacteriostatic water.
Frequently Asked Questions
What should I check first when a peptide order arrives?
Photograph the outer package before opening it and note any damage, then check each vial for intact seals, unbroken glass, a dry lyophilized cake and legible labels. Raise any problems with the supplier before opening or reconstituting a vial.
Should the lot number on my vial match the COA?
Yes. A COA describes only the batch that was tested, so the vial’s lot number, product name and fill amount should match the report. If they do not, ask the supplier to confirm the correct report in writing.
How should lyophilized peptides be stored after delivery?
Sealed lyophilized vials are generally kept cold, dry and protected from light and moved into storage the same day. Let a vial reach room temperature before opening to reduce condensation.
What should a peptide receiving log include?
At minimum, record the date received, supplier and order number, product and fill amount, lot number, whether the COA is on file, condition notes, storage location and who received it.
Research use only. All Pure Tested Peptides products are sold strictly for laboratory research and are not for human or veterinary use. Nothing in this article is medical advice or a claim that any compound diagnoses, treats, cures, or prevents any condition.




Leave a Reply
Want to join the discussion?Feel free to contribute!